Disaster Area Designs Disaster Area Designs MIDI Box 4

Presenting the newly updated Disaster Area Designs MIDI Box 4 control interface for pedals. Updated and more powerful than ever, the MIDI Box 4 converts standard 5-pin (DIN) MIDI communications to a variety of 1/4″ formats. Four independent control ports interface to your devices, and new user-accessible configuration switches make setup easier than ever. Each control port may be set to one of four output modes, selectable using the DIP switches on the face of the MIDI Box 4. Tip Active:. Suits Alexander, Meris, Empress, Bondi, and other devices using voltage mode on the jack tip Ring Active: Suits Chase Bliss Audio and other devices using voltage mode on the jack ring Tip and Ring Active: Provides separate outputs on tip and ring of the control port, enabling two MIDI outputs using our TRS Insert Cable TRS MIDI: Sets the tip active and pulls the ring terminal high, for use with Boss, Jackson, Cooper, Swindler and other devices that conform to the MIDI TRS specification. Supported Devices: Chase Bliss Audio: All current pedals. Connect with TRS cable, set port to RING ACTIVE. Blooper Brothers Condor Dark World Gravitas MOOD Spectre (all versions) Thermae Tonal Recall (blue and RKM) Warped Vinyl Mk1 (supports MIDI clock only) Warped Vinyl Mk2 and HiFi Wombtone Mk1 (supports MIDI clock only) Wombtone Mk2 Alexander Pedals: All Neo Series Pedals. Connect with mono / TS cable, set port to TIP ACTIVE Colour Theory Defender F.13 Neo Marshmallow Quadrant Radical Delay DX Sky 5000 Space Race Super Neo-Matic Superball Syntax Error Wavelength Empress Effects: Connect with mono / TS cable. Set port to TIP ACTIVE. Echosystem Phaser Tremolo 2 Reverb ZOIA Meris: All current pedals. Connect with mono / TS cable. Set port to TIP ACTIVE. Enzo Hedra Mercury 7 Ottobit Jr Polymoon Boss: All 200-series pedals with 1/8″ MIDI jacks. Use TRS / stereo cable. Set port to TRS MIDI. DD-200 OD-200 EQ-200 MD-200 Jackson Audio: All MIDI-compatible pedals. Use TRS / stereo cable. Set port to TRS MIDI. Golden Boy Broken Arrow v2 Bloom v2 Please note that device support also requires a compatible MIDI controller. The MIDIBox is a data converter only, and won’t magically make your controller work with these devices. If you’re not sure about controller support, contact your controller manufacturer! Power: Requires 9-12v DC input, 50mA maximum. Status LED: Lights blue when powered, blinks red when MIDI data is received. Constant high-speed MIDI data such as MIDI Clock may cause the LED to remain violet. MIDI THRU: Dedicated hardware MIDI Thru, repeats any MIDI data received to send to your other MIDI devices. You can chain multiple MIDI Box 4 units by linking the MIDI THRU from the first box to the MIDI IN of the next and so on. Dimensions: 4.4 in x 2.38 in x 1.06 in (112 mm x 60 mm x 27 mm) not including jack nuts.