As used on many Martin and other top American-made guitars in the 1950s and 1960s. A better-quality set with a nice original patina for the true vintage look. Even the gears and posts are plated, with blued gear screws....
True original Gibson parts, just discovered in our seemingly bottomless collection. They were acquired directly from Gibson sometime in the 1970s-80s-90s, during my 30-year tenure as a Gibson dealer. This is a truly...
From Allparts, a fresh unused set, still in its original sealed packaging, replicas of Fender-style Deluxe tuners with slotted tips, but way better made than the originals. All bushings and screws included. $29
The real deal, original Gibson parts, NOT reissues or copies. I was a Gibson dealer from 1970 to 2001, did their service work for them too, and stocked up on lots of parts; these are just peeking out from 20-30-40 years...
A beautiful, fancier Waverly tuning machine plate, embossed with hibiscus-and-oak leaves pattern; original buttons. WAVERLY M.P. CO. stamped onto center of back of plate, One worm has a slight hitch in its giddyap,...
An earliest of Waverly side-mount turning machine set. Two buttons replaced but you gotta look real close to know. $95
Most unusual and quite humorous in our book, this never-used set, acquired from the National company probably in the 1990s. For a slotted-peghead guitar, intended as replacements for older and all other Nationals;...
A plainer-looking but equal-functioning Waverly 3-on-a-side set, the same mechanically as found on the more expensive guitars but with unplated brass posts and no decoration on the backplates. Exceptionally tight. $75
Gibson made a lot of different models of acoustic guitars in the 1970s, and this style of ebony bridge was used on may of them. It has a reinforced area around the pin holes set into its top, does not go through, quite...
It’s endless, More from the years when I was buying parts direct from Gibson for I-don’t-know-what-reason, just showing up now, probably been here for at least thirty years. Gold-plated Humbucker covers, pole-piece...
Coming out of storage here after literally decades, this is a complete bridge, including aluminum base with threaded posts and height-adjustment wheels, not just a top, intended to be used in conjunction with all those...
From out of our parts treasure trove, three stop tailpieces. One is unmarked, probably from a Gibson guitar; one intonation screw missing, other jammed but won’t matter when you’re using it as a tailpiece. One is marked...