Radial Engineering Radial Engineering Highline Mono Passive Line Isolator
Description
Presenting the new Radial Engineering Highline Passive Line Isolator. The Highline is a line isolator that is specifically designed to address the needs of instrumentalists who use amp modelers, allowing them to seamlessly connect to a PA or a recording system while maintaining their full signal integrity with no added noise or distortion. The Highline features a premium Jensen 1:1 transformer, which retains the full volume level from the pedalboard to the PA, while also providing galvanic isolation that eliminates ground loop noise for a clean and noise-free signal. The balanced output of the Highline allows for long cable runs to the PA, and it also blocks phantom power so it never reaches the pedalboard. The Highline can also accept stereo inputs and sum them down to mono with the use of the Sum switch. Guitarists and bassists who use utilize amp modelers on their pedalboard have a unique set of problems: While amp sims can produce line-level outputs, they often still use 1/4" unbalanced connectors that won't support long cable runs without degrading the tone of the instrument, and they are particularly susceptible to noise from ground loops when connected directly to the PA. The Highline addresses these issues by inserting a 1:1 transformer into the signal path, which provides isolation to reduce noise, protects against phantom power, and keeps the signal at line level for direct connection to the PA system. Audio circuit type: Passive, transformer based Transformer: JT-11-YMPC Number of channels: Single channel (mono) Frequency response: 20Hz ~ 20KHz (± 0.05dB) Total harmonic distortion: Phase Deviation: ±0.3° from 20Hz ~ 20kHz / -10dB Signal to Noise: 110dB Features Ground lift Extras: Input Sum, Thru Sum General Construction: 14-gauge steel outer shell & 16-gauge chassis Finish: Durable powder coat Size (L x W x D): 4.25" x 2.75" x 1.75" (108mm x 70mm x 44mm) Shipping size (L x W x D): 6.5" x 4" x 3" (165mm x 102mm x 76mm) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable