These stainless steel neck plates are .075" thick compared to import plates at .060". Being stainless they are stronger and will resist bending so that the body of the guitar is not dented. Available here in a high...
These stainless steel neck plates are .075" thick compared to import plates at .060". Being stainless they are stronger and will resist bending so that the body of the guitar is not dented. Available here in a high...
From Callaham: I was unhappy with the saddles I could purchase so we have been making them in-house. I have tried to eliminate all the problems with traditional saddles. They are angled for correct intonation, the...
Callaham Trem Arm Standard 6" Pop-In Mint Green Tip The short thread on the Virtual Pop-in Arm is just to keep the arm from being pulled out of the block. (Can only be used with Callaham Enhanced blocks.)
Callaham Front Roller Upgrade Kit For Bigsby B5 And B7 Units All guitars equipped with a Bigsby B5, B7 and custom Fender B5 Vibratos suffer greatly from reduced frequency response and sustain because of the complete...
Ten pack of Callaham Tremolo Springs.
Fifteen pack of Callaham Tremolo Springs.
"64" length; 5 1/4" tip to center; Virtual Pop-in Tremolo Arm :The short thread on the Virtual Pop-in Arm is just to keep the arm from being pulled out of the block. (Can only be used with our Enhanced blocks.)...
Callaham's saddles are designed from original Pre-CBS saddles with improvements. They have slightly lengthened the string slot compared to the Pre-CBS saddle so that the string will not bind and bend against the sharp...
When the vibrato bridge was first designed in 1954, it had a machined steel inertia block for the simple reason it gave the instrument the required sustain and harmonic content. Over the years, manufacturers have...
Callaham's saddles are designed from original Pre-CBS saddles with improvements. They have slightly lengthened the string slot compared to the Pre-CBS saddle so that the string will not bind and bend against the sharp...
When the vibrato bridge was first designed in 1954, it had a machined steel inertia block for the simple reason it gave the instrument the required sustain and harmonic content. Over the years, manufacturers have...
Requires a 11/32 hole 15:1 ratio Slotted posts
The short thread on the Virtual Pop-in Arm is just to keep the arm from being pulled out of the block. (Can only be used with Callaham Enhanced blocks.)Super Short Gilmour style length (4 1/8" tip to center)
Sold In Packs of 5.
From Callaham:The Enhanced Vintage saddles to me is our best design. It maintains the vintage look while eliminating the problem of the string moving on the saddle and altering string spacing. If you are using string...
Outfit your Tele® with these Callaham Enhanced Vintage Compensated Tele® Saddles in Stainless Steel (Set of 3)
These stainless steel neck plates are .075" thick compared to import plates at .060". Being stainless they are stronger and will resist bending so that the body of the guitar is not dented. Available here in a satin...
Callaham 360 Arm Bracket for Bigsby Vibratos This is a precision machined arm bracket that allows for full 360 rotation for the vibrato arm. This allows a player to position his picking hand without limit and maintain...
From Callaham:I again disliked the imported round string trees, so we make our own. I used a Broadcaster and "55" to make ours. Again they are made from stainless steel. They look great and have polished string slots to...