Radial Engineering Radial Engineering 4-Play Multi-Output Direct Box

Presenting the Radial 4-Play, a DI box specifically designed for multi-instrumentalists, providing the ability to quickly and silently change instruments on stage. Many performing multi-instrumentalists will have each of their instruments feed a separate channel in the PA system, allowing for individual level, EQ, and effects settings. Typically this would require multiple DI boxes and instrument cables, creating a mess on stage that can be difficult to manage. With the 4-Play, you only need to connect one cable to the input of the pedal, and it provides you with four DI outputs to feed the PA system. Not only does this mean fewer cables on stage and less devices to keep track of, but it also eliminates the need to flag down the sound engineer when you need to switch instruments during a performance. The 4-Play puts you in control, while streamlining your setup on stage. Audio circuit type: Classic Class-A FET input with balanced audio grade opamp output Number of channels: 4 Frequency response: 20Hz - 20kHz Dynamic range: 113dBu Gain: 0dBu Clip Level: +13dB Total harmonic distortion: 0.03% Intermodulation Distortion: 0.02% Phase Deviation: -0.12° @ -20dBu / 1kHz Input Impedance: 10M Ω Output Impedance: 5.4K Ω Noise Floor: -100dBu Maximum Input: +8dBu Features Ground lift Input Connectors: 1/4" Output Connectors: 4x XLR Extras: Tuner output General Construction: 14-gauge steel chassis & outer coat Size (L x W x D): 5" x 4.7" x 2" Weight: 2lb Shipping size (L x W x D): 6.5" x 5.1" x 2.5" Shipping weight: 2.4lb Power: 9V Adaptor / 80mA center pin negative Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable