Darkglass Electronics Exponent 500 500-Watt Bass Amp Head with Midi Footswitch
Description
Brand New, but B-stock as it has been opened, but not played, comes with the footswitch.
Exponent 500 is a new concept Darkglass calls a Powered Platform: a clean amplifier that, once connected, turns into a multi-effect, with fully programmable and presettable signal chains with all the components a professional bassist requires. With its audio interface capabilities and 500W of loud, ultra-clean power, Exponent 500 is an extremely capable solution for every context, all packed in a gorgeous, compact and light housing for maximum portability.
- 500 watt hybrid bass amplifier head
- Ultra clean analog amplifier with powerful digital modeling
- Assignable effects, preamps, and cabinet simulation
- Audio over USB
- Full MIDI control
- Effects loop
Combining every technology Darkglass has developed since their humble beginnings, Exponent 500 is an analog amplifier head with powerful digital signal chain modeling. From all stances: Mechanically, electronically, and with an ever-growing DSP library that has compressors, distortions, modulation, preamps, Impulse Responses and more. Connect to the Darkglass Suite app to adjust the modeled effects, preamps, and cabinet simulation, or use MIDI to control parameters or move between presets.
Front Panel
Input
Use this jack to connect your instrument via a standard ¼” mono cable.
Quick-Pots
There are five Quick-Pots on Exponent⁵⁰⁰’s front panel (A, B, C, D and E) .
By default, these pots are mapped to the Amp EQ’s four frequency bands and a preset-specific control.
In the Darkglass Suite, you can freely bind the Quick-Pots to your selection of any five controls from the effects in your signal chain.
Master
Use this knob to control the overall volume of the amplifier.
Preset
Pressing the preset button changes through presets 1 to 5 and a bypass signal. The current preset is shown with a single LED next to the preset number.
When Exponent⁵⁰⁰ is bypassed, all preset LEDs show a dim white color.
Long-press the preset button to start Bluetooth pairing. All preset LEDs will breathe white while pairing is active.
Mute
Pressing the mute button toggles mute on the physical outputs.
When Exponent⁵⁰⁰ is muted, all preset LEDs will illuminate with a dim red color.
Dimensions
Width: 21 cm / 8¼”
Length: 17.5 cm / 7″
Height: 6 cm / 2¼”
Weight: 1.65 kg / 3.64 lb
Back Panel Features:
Speaker Output
Use this connector to connect the amplifier to your cabinet. The SpeakON Combo jack allows for SpeakON or ¼” speaker cable operation. The minimum load impedance is 4 Ω. Exponent⁵⁰⁰ can be operated without a cabinet.
WARNING: Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier.
Effects send
Use this output to send the signal to your outboard gear.
Effects return
Use this input for the signal from your outboard gear.
Headphone Output
he 1/4″ stereo headphone output handles headphones with an impedance of 16 – 600 Ω. Connect your headphones and control the output level with the master volume. The headphone output has an output impedance of <1 Ω and a maximum output level of 13.3 dBu (3.6 Vrms).
XLR direct output
Direct output signal unaffected by master volume. The maximum output level before clipping is 2.2 dBu (1 Vrms).
Ground Lift
Use this control to lift the ground of the XLR output. If you are experiencing ground noise in your DI signal, try changing this control.
MIDI In
Standard DIN connector. Use the 7-pin MIDI connector only with the Darkglass MIDI footswitch, and use a 5-pin connector with other MIDI equipment.
USB
The USB-C port unlocks Exponent⁵⁰⁰’s USB audio interface capabilities and allows for software updates via the Darkglass Suite. USB MIDI In/Out is also supported.
AC Socket
Connect mains power to the amplifier. There is a voltage selector for 100-120 / 200-240 VAC, 50-60 Hz.
Darkglass Suite
Exponent⁵⁰⁰ comes preloaded with five versatile factory presets. Using Exponent⁵⁰⁰ with the Darkglass Suite isn’t necessary, but we recommend it!
Darkglass Suite unlocks the full potential of Exponent⁵⁰⁰ by providing an interface to interact and modify the signal chain running on each preset.
Use the iOS or Android versions of the Darkglass Suite to create, edit, share, and apply presets. Please make sure your Darkglass Suite version is the latest!