Here we have a lightly used Vibramate V5 adapter kit for attaching a Bigsby B5 to stop tailpiece stud holes. This unit is lightly used and shows some light wear to the plating, as well as some light patina. It includes...

Here we have an old Bigsby B5 Vibrato Tailpiece in gold! This one came off of a 1970s Gibson guitar. We’re not sure of the exact year, but it does not have the black fill around the Bigsby logo, and it is stamped Made...

Here we have a Gibson USA Nashville Tune-O-Matic bridge assembly in gold! This is from a 2001 Gibson guitar, so it has been lightly played over the years. It shows slight light wear to the plating and has a bit of a...

Here we have a Jensen C12K speaker that was removed from a modern Fender Twin amplifier. This is a ceramic 100 watt 12” 8 ohm speaker. It was lightly used in the amp before being swapped out. The speaker is in excellent...

Here we have a Jensen C12K speaker that was removed from a modern Fender Twin amplifier. This is a ceramic 100 watt 12” 8 ohm speaker. It was lightly used in the amp before being swapped out. The speaker is in excellent...

Here we have a Jensen C10R speaker that was removed from a modern Fender Princeton amplifier. This is a ceramic 25 watt 10” 8 ohm loudspeaker. It was briefly used in the amp before being swapped out. The speaker is in...

Here we have a Marshall Single Button Amplifier Footswitch with LED! This item is in very good condition overall and in good functioning order. Model number PEDL-90011.

Here we have a PEDL-90003 Single-Button Amplifier Footswitch! This item is in very good condition overall and in good functioning order. Includes everything seen in the images.

Here we have a Fender Custom Shop gold anodized Strat pickguard. It has been modded to accommodate a kill switch in the volume position. The guard is from Custom Shop Strat and it was relic'd at the factory. There are...

Here we have a Telecaster Pickguard with a black and white flower graphic. This item is in excellent condition overall. There are no mounting screws included.

Here we have a Telecaster Pickguard in Black Pearl! This item is in very good condition overall. There are no mounting screws included.

Here we have a tortoise pickguard for a Gibson Les Paul Junior! This item is in good condition overall. It shows light wear and pick marks. Includes everything seen in the images.

Here we have a KVB-N Vintage Hardtail Bridge For Fender Stratocaster! This item is in excellent condition overall and in good functioning order. Includes everything seen in the images.

Here we have chrome parts for upgrading the look of your Les Paul! Give it that John Sykes vibe with a chrome truss rod cover, poker chip, switch tip, and jack plate. These are older parts that show some aged and wear....

Here we have a parts kit that is ideal for upgrading your Les Paul to look like Randy's! We have here an old school West German Schaller tuning machine set, a brass truss rod cover, brass jack plate, gold poker chip,...

Here we have a vintage Kluson tuning machine. This is a single ring, singe line, nickel tuner with a keystone button. This is for the treble side of the headstock. It is in good shape overall and functions correctly....

Here we have a brand new set of Gotoh SE700 open gear tuners! This is a nickel three on a side set that is in the original packaging. It includes the collars and mounting screws. They have a 15:1 ratio and 15/16" screw...

Here we have a Gold Custombucker Pickup Set! These Custom Shop pickups came out of a Les Paul Custom and have the full factory length on the lead wires. The covers show light wear and patina with a subtle VOS vibe about...

Double wide bone saddle, 3-1/4" x 1/4" x 7/16".

Unbleached "Vintage" bone saddle for acoustic guitar, 4-1/8" x 1/8" x 3/8".

Unbleached "Vintage" bone saddle, 3-1/2" x 3/32" x 5/16".

Here we have a Seymour Duncan JB Jr. for Telecaster Bridge pickup! This black humbucker is brand new in the original packaging. It is part number 11205-30. Duncan's legendary JB Model in a single-coil sized humbucker...

Custom-crafted by Bourns to exact Seymour Duncan specifications, the Seymour Duncan 500k Smooth-Turning Potentiometers feature high-quality construction, tapered control, and a feel that’s just right – all from a name...

Custom-crafted by Bourns to exact Seymour Duncan specifications, the Seymour Duncan 250k Smooth-Turning Potentiometers feature high-quality construction, tapered control, and a feel that’s just right – all from a name...

Beautiful machine heads with classic round buttons, the 98 Series provides smooth, sure tuning. They feature a heavily plated finish with a striking contrast to the brass gears. Screws and bushing included. 14:1 gear...

This is a prewired harness for J-Bass (MFG# JB-PREMIER). Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with...

Our Standard Jazzmaster prewired kit (MFG# STD-JM-PREMIER) is a stripped-down circuit that does NOT include the upper controls found on a traditional Jazzmaster wiring circuit. Our prewired kit is wired up 50's style...

Wired 50's style for authentic vintage sound and feel, this is a prewired assembly for Gibson® Les Paul® Junior guitars (MFG# LP-BBJR-PREMIER). Wired with 22 AWG external braid vintage push-back wire for that vintage...

The Emerson Blender wiring harness (MFG# S5-B-250K-PREMIER) for Stratocaster and similar guitars has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you...

This is a 5-Way Strat prewired harness (MFG# S5-250K-PREMIER) for Stratocater and similar guitars featuring 3 single coil pickups. It will drop into most American Fender Strats with no modification. Wired with 22 AWG...