Spring Sale! 1938 J-35 with 3 unscalloped tone bars. There is a hole where the decal is and 4 other small ones at the end of the neck. Couple of small back cracks. I’m trying to sort out the tuners right now ( I just...

Spring Sale! Blood, Sweat and Tears! This Mojo Box has seen a festival or two I’m sure. It needs a little attention. Mainly new bridge and some fret work. Not sure what’s going on with the bridgeplate. It looks like a...

Spring Sale! Player grade total refin. Narrow neck. Bridge isn’t original and bridgeplate has a piece of wood on top of it. Black pickguard. (More accurate one just taped on for looks but it’s too small.) Center seam...

Spring Sale! Early 1949 stamped D-18. This guitar is in need of a neck reset, a few small holes plugged, as well as a couple of small cracks glued. Non original case.

Spring Sale! Very clean top with some capo wear on back of neck. Fresh neck reset. Three unscalloped tone bars like a pre 1940 J-35. Repaired pickguard crack. Some of these can sound a little thin and bright but this...

Silver Metal Flake, a very hard finish to do. Looks to be a Fender neck with a slab rosewood fretboard and C neck profile. Has a Bigsby tremolo too. The neck pickup is an SCN Noiseless Tele pickup, the bridge pickup is...

SN 95918. A wonderful, well-preserved example of a postwar Martin 000-28, built in Nazareth, PA in 1946 with what must have been some of the finest tonewoods available at the time. The Brazilian rosewood back and sides...

Spring Sale! Super clean early 50’s D-28 with all original finish, bridge, bridge pins and bridgeplate. Only a couple of pickguard cracks. Really nice straight grain Brazilian. Fresh neck reset and refret. This is...

There's a reason 63 and 64 ES-335's are so popular with players (and no, it's not because Eric Clapton played a 64). The reason is the neck. A large percentage of player like a neck that is relatively slim at the lower...

Spring Sale! Great early 50’s D-28! All original finish except a very small area of overspray on lower top edge from case crunch. Original bridge and bridgeplate. Partial refret. A couple of holes were plugged (very...

1962 Gibson J50 Here we have a gorgeous 1962 Gibson J50 acoustic guitar with a fixed bridge and the 1-11/16 nut and not quite the larger rounded neck "C" profile of the 50's Gibson, thus my selling. It is in excellent...

Taylor Custom GA cutaway Guitar (used, 2016) From the Original owner - Fantastic Highly figured Koa Top, Back, and sides Venetian cutaway Chrome, Taylor branded tuning machines Ebony fretboard bound with faux...

1971 Martin 000-18 in very good condition. This Martin has had a professional neck reset and has a new saddle. This 000-18 was constructed with a spruce top, mahogany back and sides, a mahogany neck with a Brazilian...

Spring Sale! Neat little Brazilian Prairie State 425 probably from the 1930’s. Original finish with a good neck angle. The bridge has probably been replaced but looks correct size. Some sloppy glue behind it. One bent...

Spring Sale! Dirty Mojo! Ok, not as nice of condition as some I’ve had but it has character and great tone! From what I can tell, it’s all original finish. Several repaired cracks and a couple of patches on side. Recent...

Spring Sale! Super lightweight and scalloped. New bridge, frets and neck reset. Some bumps and bruises. Nothing that I would call a crack that I see. One small gouge on lower side repaired. Ebony rod. Newer tuner tips....

Spring Sale! Clean example. Neck reset and new bridge. Few side cracks and one fairly long one on back. New buttons. Nut width is actually a little over 1 3/4, more like 1 25/32 which is not uncommon on some of these...

Spring Sale! More of a player grade sunburst J-35. The biggest issue is a patch on the back edge. It looks darker like a piece of rosewood. A couple of cracks close by with some touch up and overspray. Old waterslide...

Spring Sale! Here's one that's different! A custom made guitar from 1976. Extensive abalone trim and thick binding. Indian Rosewood. The current neck was actually recently made by another luthier. 1 3/4 nut width.....

This Coral Wasp Bass was made by Danelectro in 1968 in the USA. These are great playing and sounding instruments. This one shows light play wear but overall its in nice shape and all original. It has been pro-setup in...

This Gibson '59 Reissue Les Paul was made in the USA in 2023. It has the Wildwood Specs and is unique to other R9s because instead of the (period correct) humbuckers, it has two P90s. This guitar is in excellent...

This Fender Stratocaster was made in the USA in 1974. That said, the neck is dated December 1972, and the pots and pickups early 1974. Therefore it is possible that a former owner put a slightly older neck on it. Either...

This is an extremely cool Fender P-Bass, made in the USA in 1952. First version with slab-body. The original owner (presumably named Ray) refinished it white a long time ago and affixed mailbox letters of his name on...

This Wandré Cobra Basso bass guitar was made in Italy in the early 1960's. This is a very cool and rare example with the large looped headstock - a truly unique design. This bass has heavy play wear all over but remains...

This Microfrets Thundermaster Bass was made in Maryland in the late 1960's. The serial number is 1179 which is the lowest serial number listed on the Microfrets online registry. The model designation on the neck is...

Sale! Serial # 160 is a Monteleone Eclipse 17" Special created by John in 1996 featuring a striking violin red finish and highly-figured curly maple back, sides, and neck. This instrument was purchased in 1998 by Robert...