1974 Gibson SG Standard Walnut
Description
Gibson 1974 SG Standard
This vintage-era “SG Standard” model features a three-piece mahogany neck with a volute, an ebony fingerboard and block position markers.
The neck pickup is equipped with the original Super Humbucker.
The replacement and modification points are as follows:
- Bridge pickup (model unknown)
- Bridge
- Knobs
- Toggle switch tip
- Pots
- Capacitor
- Strap pin relocated to the cutaway tip (original hole remains)
- End pin relocated next to the original position (original hole remains)
It is in typical condition for its age, showing damage such as a chip at the base of the tailpiece stud on the sixth string side, sticker residue on the back of the body, a crack in the neck pickup ring and some tiny dents and paint chips. However, there are no issues affecting playability.
Appearance: Shows age-appropriate wear
Frets: Leveled, slight indentation on lower frets, overall about 50% intact
Neck Condition: No issues
Truss Rod: Functions well
Replaced Parts: Rear PU / Bridge / Knobs / Toggle Switch Tip / Pots / Capacitor
Repairs/Modifications: Strap pin relocation
Body : Mahogany
Neck : Mahogany
Fingerboard : Ebony
Fingerboard radius: 12"
Frets: Original
Nut width: 40.0mm
Neck profile: C-shape (1st fret: 20.8mm / 12th fret: 24.9mm)
Neck joint: Set neck
Neck Scale: 24.75 inches (Medium Scale)
Pickups: Front Super Humbucker (Original) / Rear Model Unknown (Replaced)
Controls: 2 Volume / 2 Tone / 3-way Pickup Selector
Machine Heads: Original Gibson Stamped
Weight: 3.19 kg
Case: Non-Original Hard Case (90s Gibson USA Case)
This vintage-era “SG Standard” model features a three-piece mahogany neck with a volute, an ebony fingerboard and block position markers.
The neck pickup is equipped with the original Super Humbucker.
The replacement and modification points are as follows:
- Bridge pickup (model unknown)
- Bridge
- Knobs
- Toggle switch tip
- Pots
- Capacitor
- Strap pin relocated to the cutaway tip (original hole remains)
- End pin relocated next to the original position (original hole remains)
It is in typical condition for its age, showing damage such as a chip at the base of the tailpiece stud on the sixth string side, sticker residue on the back of the body, a crack in the neck pickup ring and some tiny dents and paint chips. However, there are no issues affecting playability.
Appearance: Shows age-appropriate wear
Frets: Leveled, slight indentation on lower frets, overall about 50% intact
Neck Condition: No issues
Truss Rod: Functions well
Replaced Parts: Rear PU / Bridge / Knobs / Toggle Switch Tip / Pots / Capacitor
Repairs/Modifications: Strap pin relocation
Body : Mahogany
Neck : Mahogany
Fingerboard : Ebony
Fingerboard radius: 12"
Frets: Original
Nut width: 40.0mm
Neck profile: C-shape (1st fret: 20.8mm / 12th fret: 24.9mm)
Neck joint: Set neck
Neck Scale: 24.75 inches (Medium Scale)
Pickups: Front Super Humbucker (Original) / Rear Model Unknown (Replaced)
Controls: 2 Volume / 2 Tone / 3-way Pickup Selector
Machine Heads: Original Gibson Stamped
Weight: 3.19 kg
Case: Non-Original Hard Case (90s Gibson USA Case)