Genzler BA2-115-3SLT Slanted 1x15" Bass Amplification Array - 500W Cabinet

Description

GENZLER® AMPLIFICATION announces further enhancements to Genzler's innovative Bass Array 15-3 bass cabinet design, with the NEW SERIES 2, BA2-115-3SLT — slanted 15″ version of the BA concept delivering a powerful, big output, compact, cabinet design. Overall tonal characteristics include deep, round, full lows, smooth mid-range character, seamlessly transitioning to extended top-end clarity.


The innovative SERIES 2 Bass Array design blends the benefits of all new Italian-designed speakers — a 15” neodymium woofer in a vented bass reflex design with the performance and pattern control of a 4 x 3” neodymium cone-driver line array element. Additionally, the placement of the Line Array in front of the 15” woofer further provides a type of “single point source” projection—think of it as concentric speakers, one inside of the other, in the same linear plane. Also due to line array principles the all-important mid and high frequencies have a much wider horizontal dispersion with a more controlled vertical pattern.


The benefits of combining both loudspeaker elements in an extremely compact speaker system are exponential for the player:



  • Full, deep, low frequency response from the high efficiency 15” ported woofer.

  • Smooth, seamless, clear, and articulate mid-range to high frequency transition across the audio spectrum.

  • Broad horizontal dispersion far exceeding conventional woofer/tweeter combinations.

  • And now, the NEW SERIES 2 update offers even more advancements with increased power handling, broader frequency response, more detail, mid-clarity, definition, and extended top-end, all in an even lighter-weight cabinet.


What this means in the context of performance is the most focused, defined, musically smooth and seamless response possible throughout the cabinet’s entire broad-range bandwidth. An excellent choice when used as a single enclosure or in combination with additional BA straight or slant cabinets. This offers multiple options to the player to configure their BA2-115-3 SLT stack for the best coverage of the stage or performance venue.


FEATURES




  • Neodymium 15” Woofer w/4 x 3” Neodymium Line Array Drivers

  • Ported Cabinet Design

  • Cabinet Built w/Lite-ply & Baltic Birch Plywood

  • Side Recessed Flush Handles

  • Dual Speakon® and ¼” Input Jacks

















SPECIFICATIONS



General



  • Power Handling: 500 Watts

  • Frequency Response: 30-18K Hz

  • Sensitivity 1W/1M: 99 dB

  • Nominal Impedance: 8 ohm

  • Crossover Frequency: 800 Hz

  • Weight (lbs): 36

  • Dimensions (Height x Width x Depth): 17.5″ x 23″ x 19 3/8″


Speaker Components



  • One: Premium Neodymium 15″ loudspeaker utilizing a fiberglass former voice coil with a unique dual-wound (inside/outside winding) design for increased power handling and thermal capacity.

  • Four: Premium Neodymium 3″ full-range, mid/high cone drivers utilizing a fiberglass former voice coil, a unique dual-wound (inside/outside winding) design for increased power handling and thermal capacity. These drivers are loaded into a sealed line array stack.


Input Panel/Crossover Network



  • Custom designed 6 dB/octave slopes in balance with the acoustical controls of each enclosure.

  • Two — Speakon® NL-2 connector and two – ¼” sealed jacks; to reduce rear cabinet air loss and noise.


Cabinet



  • Cabinet Built w/Lite-ply & Baltic Birch Plywood

  • Heavy-duty textured black vinyl.

  • Black metal corners and side-mounted recessed handles.

  • Custom, curved grille with a unique center “pleat” to protect the array column.

  • Large rubber feet.