1952 Gibson Les Paul 52-57 PAF Conversion

If you are looking for an Old Wood Les Paul with original PAF's then check this one out. The guitar started out as an all original 1952 P90 Goldtop Les Paul. All the woods, (mahogany body, maple top, mahogany neck, Brazilian fingerboard, Holly Veneer, Inlays, Body Binding, MOP Gibson Headstock Inlay)) are original to the guitar. Small neck binding repair on the bass side from nut to the 3rd fret. The guitar has the original finish from the Gibson factory. There was a small crack on the back of the headstock that I repaired. It’s been solid and after the repair it is hardly noticeable. The guitar is lightweight at 8lbs. and is super resonant.

Conversion includes the following:
Steam Out Original Neck
Rework Tenon/Neck Pocket (Hide glue & Mahogany shim)
Glue crack in back of headstock
Reset Neck To 4 Degrees then glue it back in with Hide Glue
Add mahogany shims under the ends of the fretboard
Plug P90 Routes/Route For Humbuckers
Touch up around neck pocket & headstock repair with Correct Nitro Lacquer
ThroBak M69 Rings / Repro ABR1 Bridge
Refret
Gibson Chainsaw Case

Original Parts: Kluson single line tuners, backplates, Recut pickguard for PAF’s, Strap Buttons

50’s Parts: 1957 Pots with Bumble Bees, 57 Knobs, 57 Wraptail Bridge used for Tailpiece,
57 Tailpiece Studs, 1959 Gibson PAF pickups

All work was done by me: Jim Weyandt, owner of JamCity Guitars and comes with a COA.

*****Click on Blue tab to the right to see the conversion process ***

$400. UPS Next day air shipping to lower 48 states.